CS212L Dual 12″ Subcardioid Subwoofer

SKU: CS212L Dual 12" Subcardioid Subwoofer Product Series:

The CS212L incorporates Fulcrum’s proprietary Passive Cardioid Technology to overcome one of the major challenges of many loudspeakers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 8 dB of rear rejection over the subwoofer’s operating range.

CS212L Dual 12" Subcardioid Subwoofer

  • Operating Mode: Single- or Dual-amplified w/ DSP
  • Operating Range: 36 Hz to 156 Hz
  • LF Transducers: 2x 12.0” woofers, 4.0” voice coil; ceramic magnet
  • Power Handling at Nominal Impedance: 1400 W @ 4 Ω
  • Equalized Maximum SPL (peak / continuous): 134 dB / 128 dB (half space)

Overview


The CS212L is a low profile, dual 12 inch subcardioid subwoofer module intended for permanent installation in a wide range of venues. Its premium, high power transducers provide impressive low frequency impact and solid musicality. Twelve M10 mounting points facilitate either horizontal or vertical overhead suspension. Four vibration isolation feet prevent spurious vibrations and “walking” in horizontal ground stack applications.

The CS212L incorporates Fulcrum’s patented Passive Cardioid Technology™ to address one of the major challenges of many direct-radiating subwoofers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 8 dB of rear rejection over the subwoofer’s operating range.

The subcardioid behavior is produced by a meticulously conceived acoustical circuit which balances the position of the low frequency driver, the enclosure depth and volume, and specially constructed rear-mounted ports which include a calibrated resistive element. By opting for a subcardioid pattern as opposed to a pure, hyper or super cardioid pattern, the rear rejection increases when the modules are deployed in a subwoofer array.

Fulcrum Acoustic’s TQ™ processing is an integral part of the CS212L design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.
Product Inquiry

...or give us a call: (866) 234-0678

Projects Using the CS212L Dual 12″ Subcardioid Subwoofer

Designed and developed by

Contact
Us