CSP118 18″ Subcardioid Subwoofer

SKU: CSP118 18" Subcardioid Subwoofer Categories: ,

The CSP118 incorporates Fulcrum’s proprietary Passive Cardioid Technology™ to overcome one of the major challenges of many loudspeakers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 10 dB of rear rejection over the subwoofer’s operating range. Includes handles and M20 threaded speaker pole mounting plate for use in portable applications.

CSP118 18" Subcardioid Subwoofer

  • Operating Mode: Single-amplified w/ DSP
  • Operating Range: 29 Hz to 137 Hz
  • LF Transducers: 18.0″ woofer, 4.0″ voice coil; ceramic magnet
  • Power Handling at Nominal Impedance: 1200 W @ 8 Ω
  • Equalized Maximum SPL (peak / continuous): 136 dB / 130 dB (half space)
  • Dimensions (W x D x H): 24.6 × 30.0 × 29.8 in
  • Weight: 120.00 lbs
The CSP118 is a portable, subcardioid subwoofer module intended for a wide range of venues. It includes a single, high power 18 inch direct-radiating woofer in a compact enclosure. An M20-threaded connector plate is centered on the CSP118’s top panel for use with the optional, height-adjustable SP1 Speaker Pole. This pole’s M20 threaded bolt screws securely into the connector plate and is used to mount loudspeakers equipped with a 35 mm / 1.38 inch pole socket directly above the CSP118. Four vibration isolation feet prevent spurious vibrations and “walking”. When stacking enclosures, the vibration isolators nest in recesses in the enclosure below.

The CSP118 incorporates Fulcrum’s patent-pending Passive Cardioid Technology™ to overcome one of the major challenges of many loudspeakers: excessive rear LF radiation. Unlike active cardioid loudspeakers, Fulcrum’s passive cardioid technology does not require an additional amplifier channel or additional transducer to achieve its impressive low frequency directional control: 10 dB of rear rejection over the subwoofer’s operating range.

Fulcrum Acoustic’s TQ™ processing is an integral part of the CSP118 design. Sound, innovative acoustical design combined with state of the art digital processing leads to exceptional clarity and precise transient response, even at very high sound pressure levels. The required digital signal processing can be provided by one of many supported platforms.
Product Inquiry

...or give us a call: (866) 234-0678

Projects Using the CSP118 18″ Subcardioid Subwoofer

Designed and developed by

Contact
Us